AT&T DS1/DMi/ISDN-PRI manual 24ADMINISTRATION Options and Requirements System

7-24ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85

ENHANCED MODE - PROCEDURE: 100, WORD: 1

TRUNK GROUP TRANSLATION

1. Trunk Group:

DIAL ACCESS CODE/TRUNK ID CODE

2.Digit 1:

3.Digit 2:

4.Digit 3:

5.Digit 4:

	6 . Trunk Type:
7 .		Dial Access Restriction:
	8 . Personal CO Line Appearance:
	DISPLAY ONLY
9.		Signaling Type:
	Connected to CC0 ON-LINE
	enter	command:
Figure 7-10.Procedure 100 Word 1: Trunk Group Translations (System 85 R2V4)
Field 1		Assigns a trunk group number. Permitted entries are any unused number from 18
		through 999.
Field 2		Assigns the first digit of the trunk access code. Permitted entries are 0 through 9 for
		digits 0 through 9 and with 11 and 12 for the symbols * and #, respectively.
Field 3		Assigns the second digit of the trunk access code. Permitted entries are 0 through 9.
Field 4		Assigns the third digit of the trunk access code. Permitted entries are 0 through 9.
Field 5		Assigns the fourth digit of the trunk access code. Permitted entries are 0 through 9.
Field 6		Defines the trunk type of a specific trunk group. The ISDN-PRI facility may be
		used to support several different trunk types. These may include both conventional

and the ISDN-dynamic trunk types. An important point to remember is that the service application (such as MEGACOM, MEGACOM 800, or SDN) and incoming digits are the primary determining factors controlling which trunk type is selected.

To date, trunk type 41, 42, or 43 have been the trunk types used most frequently to support all ISDN applications, including CBC.