AT&T DS1/DMi/ISDN-PRI manual 82ADMINISTRATION Options and Requirements Generic

7-82ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2

				ENHANCED MODE - PROCEDURE: 100, WORD: 1
				TRUNK GROUP TRANSLATION
1.	Trunk Group:
DIAL	ACCESS		CODE/TRUNK	ID CODE
2 . Digit			1:
3 . Digit			2:
4 . Digit			3:
5 . Digit			4:
6. Trunk Type:
7 .		Dial Access		Restriction:
8 . Personal CO Line Appearance:
9.	Public		Network Access/Egress:
DISPLAY		ONLY
10.		Signaling Type:

Connected to CC0 ON-LINE

enter command:

Figure 7-39.Procedure 100 Word 1: Trunk Group Type Signaling and Dial Access (ID) Code (Generic 2)

Field 1	Assigns a trunk group number. Permitted entries include any not already used
	number within the range of 18 through 999.
Field 2	Assigns the first digit of the trunk access code. Permitted entries 0 through 9 for
	digits 0 through 9 and with 11 and 12 for the symbols * and #, respectively.
Field 3	Assigns the second digit of the trunk access code. Permitted entries include digits 0
	through 9.
Field 4	Assigns the third digit of the trunk address code. Permitted entries include digits 0
	through 9.
Field 5	Assigns the fourth digit of the trunk access code. Permitted entries include digits 0
	through 9.