AT&T DS1/DMi/ISDN-PRI manual Procedure 107 Word 1 Atms TTL Assignment System 85 R2V4

	ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2	7-105
Field 5	Assigns a BCCOS to the preference. Permitted numbers include any previously
	defined BCCOS from procedure 014, word 1. However, BCCOS = 4 is the
	recommended option.

Procedure 107 Word 1: ISDN Trunk Verification by Terminal, Attendant, and ATMS

This procedure must be translated to support the trunk verification by voice terminal and trunk verification by attendant features over ISDN-PRI facilities. Figure 7-53, Procedure 107 Word 1: ISDN Trunk Verification by Terminal, Attendant, and ATMS, depicts this procedure.

ENHANCED MODE - PROCEDURE: 107, WORD: 1

ATMS - TERMINATING TEST LINE ASSIGNMENT

1.Trunk Group:

2.Test Line Type:

TTL TELEPHONE		DIGITS
3.	Digit	1:	11.	Digit	9:
4.	Digit	2:	12.	Digit	10:
5.	Digit	3:	13.	Digit	11:
6.	Digit	4:	14.	Digit	12:
7.	Digit	5:	15.	Digit	13:
8.	Digit	6:	16.	Digit	14:
9.	Digit	7:	17.	Digit	15:
10.	Digit	8:	18.	Digit	16:
DISPLAY	ONLY

19. Trunk Type:

Connected to CC0 ON-LINE

enter command:

Figure 7-53.Procedure 107 Word 1: ATMS TTL Assignment (System 85 R2V4)
Field 1	Identifies those ISDN-PRI trunk groups to be accessed by the trunk verification
	features. Permitted encodes are previously defined trunk group numbers within the
	range of 18 through 999.
Field 2	Dash (–),is appropriate for voice terminal and attendant console applications.
	If a transmission test line is used, its type should be specified.
Fields 3-18	Assigns digits for the terminating test line.

NOTE: Procedure 107, words 2-7, need only be translated whenever ATMS is used.