SCREEN

MODE NORMAL

V-POSITION

H-POSITION

AUTO PICTURE

FINE PICTURE

PICTURE ADJ.

J SELECT LM ADJUST MENU RETURN

OPTIONS1

OSD ON

OSD ADJ.

POWER MGT.

GRAY LEVEL

CINEMA MODE

DVI ADJ.

LONG LIFE

RESET

J SELECT LM ADJUST MENU RETURN

OSD ADJ.

1

2

3

4

5

6

7

8

9

Screen settings menu

In this menu you are allowed to adjust the position of the picture and to correct the flickering of the picture menu items.

Note:

-The AUTO PICTURE, FINE PICTURE and PICTURE ADJ. menu items are not available with signals from a Video source.

-The menu items FINE PICTURE and PICTURE ADJ. are available only when you select

AUTO PICTURE OFF.

-Select RESET in the OPTIONS 1 menu to restore the predefined factory PICTURE settings.

&Select MODE and press the cursor left/right to select a picture format (NORMAL or FULL in VGA-mode).

éSelect AUTO PICTURE ON or OFF. When having selected ON,

the PICTURE ADJ. and FINE PICTURE adjustments are made automatically. When having selected OFF, the PICTURE ADJ. and FINE PICTURE adjustments can be made manually.

FINE PICTURE adjusts for flickering; PICTURE ADJ. adjusts for striped patterns on the picture.

Select V-POSITION, H-POSITIONto adjust the position of the picture. V-POSITIONadjusts the vertical position,

H-POSITIONadjusts the horizontal position,

Options 1 menu

OSD

Select OFF if you do not want On screen information like input source, screen mode, etc. to appear on screen during presentation, etc.

OSD ADJ.

Select OSD ADJ. 1-9 to position the menus that appear on screen. The position can be set between 1 and 9.

POWER MGT. (only in VGA mode)

Select POWER MGT. ON to turn the power management function on. The power management function is an energy-saving function and automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse in not operated for a certain time. (See also the computer’s operating instructions).

Note: if the computer’s power is not turned on, the power management function is set to OFF.

GRAY LEVEL

This control allows you to set the gray level for the sides of the screen when a normal 4:3 picture mode is displayed. It adjusts the brightness of the black for the sides of the screen.The standard is 0 (black) and the level can be adjusted from 0 to 15.The predefined factory setting is 3 (dark gray).

CINEMA MODE

Select CINEMA MODE ON to automatically discriminate and project the film image in a cinema mode suited to the picture (NTSC, PAL60, 480I, (60Hz) only).

8Use of the menus and the menu system

Page 40
Image 40
Philips FTR 9965/12 manual Screen settings menu, Options 1 menu