Before calling Service
Ambient temperature
Do not hang up the monitor above a central heating or other heating sources. If the power/standby indicator in front is red and blinking, the temperature inside the monitor has become too high and has activated the protector.The monitor will be turned off. Unplug the power cord and wait for the monitor to cool down.
Care of the screen
Clean the
Plasma Display characteristics
Caution:A video source (such as a video game, DVD, or video information channel) which shows a constant
To prevent or to reduce
Very incidentally and after a longer period of unuse (approx. 1 year) the screen may display some strange colour deficiencies. This is quite normal for plasma displays and these effects will disappear after the set has been turned on for some time.
A plasma display consists of more than 1,2 Million colour pixels. It is within industry standards that very few pixels (< 0.001%) may be defective, even for a new set. There is however no reason to doubt about the quality of the set.
The plasma display technology operates with rare gases which are being influenced by air pressure. Up to an altitude of 2000m above
The plasma display might then also produce a humming sound. After bringing the set below 2000 m (local air pressure equal or above 800 hPa) it works fine again.Transportation has no influence.
Control of peripheral equipment
The infrared radiation of the screen may influence the reception sensitivity of other peripherals. Solution: replace the batteries of the remote control or change position of other equipment. E.g. keep away a wireless headphone from within a radius of 1,5 m.
No stable or not synchronised VGA picture
Check if you have selected the correct display mode in your PC. See Table of Signal Supported.
No picture
Are the supplied cables connected properly? (The power cable to the display, the VGA cables,...)
Is your PC switched on?
Do you see a black screen and the indicator in front of the monitor lights up green, this means that the display mode is not supported.
Switch your VGA source to a correct mode.
Remote control
If your monitor no longer responds to the remote control, the batteries may be exhausted.
If your problem is not solved: Switch your monitor off and then on again.
Never attempt to repair a defective monitor yourself.
Check with your dealer or call a video technician.
Transport
Keep the original packaging to transport the monitor if needed.
End of life directives
Philips is paying a lot of attention to produce
At the end of its life specialised companies can dismantle the discarded monitor to concentrate the reusable materials and to minimise the amount of materials to be disposed of.
Please ensure you dispose of your old monitor according to local regulations.
How to dispose of batteries ?
The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.
Miscellaneous
. Ambient temperature: + 5~ + 40°C
. Maximum operating altitude: 2000 m/6526 ft
(min. air pressure 800hPa)
. Mains:AC
. Standby consumption: 1 W
. Weight (excl. packaging) Display: 46 kg
. Dimensions (wxhxd):
Display: 124,2 x 76,7 x 11 inch
. Wall mounting bracket included
Settings are out of adjustment
Select RESET in the OPTIONS 1 menu, p. 8 to restore the predefined factory settings.
