6Use of the remote control
POWER
BRIGHTNESS CONTRAST
ZOOM OUTZOOM INZOOM ON/OFF
VGA AV1 AV2 AV3
MUTE
AV MUTE
q
123
456
789
0
VCH/PR
MENU
OK
¬
B
VGA
press repeatedly to select your computer
connected to the VGA or to the DVI (digital
RGB) connector.
VNo function
¬Mute key No function
CH/PR Programme selection
To browse through the sources selected.
Bto switch to standby or on again
(Does not operate when POWER/
STANDBY indicator of the plasma display
is off).
MENU to switch the menu on/off
cursor keys to select your choice and to
alter a selected adjustment.
OK to activate your choice
AV MUTE to mute the picture or
restore it if the plasma display is used in
the VGA mode.
When activated a green indicator starts
blinking in front of the plasma display.
qPicture format
Press the qkey to switch between the
different picture formats.
BRIGHTNESS +/-
to adjust the brightness level of the picture
CONTRAST +/-
to adjust the contrast level of the picture
ZOOM ON/OFF
to activate/de-activate the zoom function.
ZOOM IN/OUT
to adjust the zoom factor and to change
the magnification of the picture when
zoom is activated.
Use of the remote control
Picture format
Press the qkey to switch between the different picture formats.
Note:When the setting of PICTURE SIZE in the OPTIONS 2 menu,p. 10, is off,the picture for mat of RGB-input pictures will be
TRUE in place of NORMAL.
VGA-mode
4:3 signals Wide signals
Normal/True True
Full Full
126 1022.4 gb 20-12-2002 11:54 Pagina 6