AT&T DS1/DMi/ISDN-PRI manual Procedure 012 Word 2 Name Database

7-40	ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
Field 4	The main function of this field is to provide some administration control over what
	is displayed on the voice terminals digital display. Field encodes and their
	descriptions are:
	– (Dash) for all incoming only trunk groups.

0Used when the user (extension) does not want the outgoing trunk group name displayed but does desire the dialed number to remain on the display.

1Used when the user desires to display the name of the outgoing trunk group (such as ISDN/SDN, MEGACOM, or CBC).

NOTE: For a tandem interworking call, the name of the incoming trunk group is transmitted in the display IE of the ISDN-PRI outgoing trunk group.

Field 5 The method that defines the name. Field encodes and their descriptions are:

0Used for adding a new name or changing an existing name; requires that the name change be made with word 2.

1Used for copying the name from the extension or trunk group that is displayed in field 6

Field 6	This field is used with field 5 to copy an existing name to the extension or trunk
	group identified in field 1. Field encodes	and their descriptions are:
	● 000 through 99999, for extension and	directory numbers

NOTE: Whether the number is three, four, or five digits depends on the numbering plan.

●18 through 999, for trunk group numbers

Procedure 012 Word 2: Name Database

This word is used to translate a name (up to a maximum of 30 characters). Figure 7-17,Procedure 012 Word 2: Name Database Entry (System 85 R2V4), depicts this procedure.