AT&T DS1/DMi/ISDN-PRI manual System 85 R2V1 Through R2V4, Field

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85 7-3

SYSTEM 85 (R2V1 THROUGH R2V4)

This part describes administration options and requirements for System 85 R2V1 through R2V4.

Procedure 275 Word 4: ISDN Service — Enable/Disable

Procedure 275 is used to translate the system class-of-service (COS) assignments as well as several other miscellaneous services and features. Word 4 provides the capability for enabling and disabling the ISDN service. Figure 7-1, Procedure 275 Word 4: System COS and Miscellaneous Service Assignments (System 85 R2V4), depicts procedure 275, word 4.

ENHANCED MODE - PROCEDURE: 275, WORD: 4

						SYSTEM COS -	MISCELLANEOUS
1. Code Calling Access Digits:							13. CMS		Status:
3.		Trunk-to-Trunk				Transfer:	14. ISDN		Status:
ATTENDANT			RELEASE		LOOP	OPERATION	ADMINISTRABLE			ALARMS
	4.				Status:		15.	Even Port Peripherals:
	5.	Timed		Recall	Timer:		16.			Trunk	Software:
							17.		Auxiliary		Software:
6.	Default			Recent	Disconnect Interval:
							DISPLAY		ONLY
MAXIMUM PREEMPTION					LEVEL		18.	Local		Switch	Number:
	7.	All	Incoming:
OUTGOING
		8.	Terminal:
		9. Attendant:
10.	AUTOVON			Interface		Switch:
11.		ACD	Abandon Call			Search:

Connected to CC0 ON-LINE

enter command:

Figure 7-1.Procedure 275 Word 4: System COS and Miscellaneous Service Assignments (System 85 R2V4)

Field 14 V4 Only

For System 85 R2V4, field 14 must always be translated. Field encodes and their descriptions are:

—(Dash) required when ISDN is not provided. Current policy is to always ship ISDN-PRI software with the switch. However, the administration software still provides the option to show that this software is not provided.

0Must be translated when ISDN is provided but not active disabled.

1Must be translated to enable ISDN service.