Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

•Be sure to disconnect the cable from the (–) battery post before installing your CDE-121. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-121 to the fuse box, make sure the fuse for the intended circuit of the CDE-121 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The CDE-121 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number or the engraved serial number is located on the bottom of the unit.

SERIAL NUMBER: INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE:

26-EN

Page 26 Page 28
Page 27
Image 27
Alpine CDE-121, 68-16909Z79-A owner manual 26-EN
Page 26 Page 28

CDE-121, 68-16909Z79-A specifications

Alpine 68-16909Z79-A,CDE-121 is a cutting-edge multimedia receiver that embodies advanced technology and user-centric design, making it a popular choice among car enthusiasts and audiophiles. This model is renowned for its seamless integration of smartphone connectivity, making it ideal for those who prioritize hands-free convenience while on the road.

One of the standout features of the Alpine 68-16909Z79-A,CDE-121 is its compatibility with both Apple CarPlay and Android Auto. This integration allows users to effortlessly access their favorite apps, music, and navigation tools through a user-friendly interface, enhancing the overall driving experience. Whether accessing maps or streaming music, drivers can maintain full control while minimizing distractions.

The radio tuner included in this model supports both AM and FM bands, ensuring access to a wide range of radio stations. Additionally, it comes equipped with a powerful built-in amplifier that delivers crisp and clear audio, elevating the quality of sound within the vehicle. The model also allows for easy integration with existing audio systems, supporting various audio formats for a versatile listening experience.

In terms of design, the Alpine 68-16909Z79-A,CDE-121 boasts a sleek and modern aesthetic that complements any vehicle's interior. The intuitive controls and responsive touchscreen interface ensure that users can navigate settings and features smoothly. The bright display is easily readable in different lighting conditions, enhancing usability for both day and night driving.

Another notable characteristic is the unit’s expandability. Equipped with multiple outputs, including preamp outputs for additional speakers or subwoofers, users can customize their audio system to meet their specific needs. This flexibility is a significant advantage for those looking to create a high-fidelity audio experience in their vehicles.

In addition, safety is a priority with the Alpine 68-16909Z79-A,CDE-121. The unit incorporates features such as Bluetooth connectivity, which not only supports hands-free calls but also promotes safety by minimizing phone-related distractions while driving.

Overall, the Alpine 68-16909Z79-A,CDE-121 represents the convergence of technology, functionality, and style. It caters to modern demands for connectivity and sound quality, making it an excellent choice for anyone looking to upgrade their automotive audio experience.
Top Page Image Contents