Oregon Scientific PS L02A user manual Projector, Project Time / Alarm Status, Flip Image

Models: PS L02A

1 28
Download 28 pages 3.27 Kb
Page 19
Image 19
PROJECTOR

EN

2.Move it to the “AUTO” position to enable continuous backlight controlled by light intensity. When activated, the backlight will be on whenever the unit perceives that the room is dark.

3.The Light Sensitivity knob is located in the battery compartment. Rotate to adjust.

4.When activated, the continuous backlight will be half as bright as usual. To achieve full brightness, press SNOOZE/LIGHT.

18

PROJECTOR

This product has a built-in projector for viewing time and alarm status at night.

NOTE The maximum projection range is 2 meters

(6 feet). The image gets larger the farther you display it.

PROJECT TIME / ALARM STATUS

In a darkened room, press SNOOZE/LIGHT to display the time and alarm status for 5 seconds.

FLIP IMAGE

Press SNOOZE/LIGHT again while the projector is on.

PS-L02A English r8 op

18

2/13/04, 12:28 PM

Black

Page 19
Image 19
Oregon Scientific PS L02A user manual Projector, Project Time / Alarm Status, Flip Image