Intel SDS2 manual Use Only for Intended Applications, Installation Precautions

Intel® Server Board SDS2 Regulatory and Integration Information

12.2.5Use Only for Intended Applications

This product was evaluated for use in ITE computers that will be installed in offices, schools, computer rooms and similar locations. The suitability of this product for other product categories other than ITE applications (such as medical, industrial, alarm systems, and test equipment) may require further evaluation.

12.2.6Installation Precautions

During the installation and testing of the board, the user should observe all warnings and cautions in the installation instructions. To avoid injury, be aware of the following:

∙Sharp pins on connectors.

∙Sharp pins on printed circuit assemblies.

∙Rough edges and sharp corners on the chassis.

∙Hot components (like processors, voltage regulators, and heat sinks).

∙Damage to wires that could cause a short circuit.

∙Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel.

WARNING: Do not open the power supply. There is risk of electric shock and burns from high voltage and rapid overheating. Refer servicing of the power supply to qualified technical personnel.

12.2.7External ICMB Cable Information

When the ICMB accessory is incorporated as part of a server solution, the external cable used to connect the ICMB cards will need to be manufactured. Note the female connectors on the early version and the universal version of the ICMB cards are different, as shown in Table 80: ICMB External Cable Connectors.

The electrical specifications for this cable are available in chapter eight of the IPMI Intelligent Chassis Management Bus Bridge Specification version 1.0 available at the following URL on the Intel web site.

http://developer.intel.com/design/servers/ipmi/license_icmb11_old.htm

Table 90. ICMB External Cable Connectors

Product Code	Description	Female Jack for External Cable
AXX2ICMBKIT	Universal ICMB card for integration with:	Keyed RJ45 (Type B)
	SCB2, SDS2

Revision 1.2	105
Order Number:	A85874-002