Intel SDS2 manual Hard Drive Selections, Removable Drive Selections, Exit Menu Selections

BIOS Intel® Server Board SDS2

	Table 49. Hard Drive Selections
Option	Description
Drive #1 (or actual drive	To select the boot drive, use the up and down arrows to highlight a device,
string)	then press the plus key (+) to move it to the top of the list or the minus key (–)
Other bootable cards	to move it down.
Additional entries for each	Other bootable cards cover all the boot devices that are not reported to the
	system BIOS through BIOS Boot specification mechanism. It may or may not
drive that has a PnP header
	be bootable, and may not correspond to any device. If BIOS boot spec.
	support is set to limited, this item covers all drives that are controlled by
	option ROMs (like SCSI drives).
	Press ESC to exit this menu.

Table 50. Removable Drive Selections

Feature	Option	Description
Lists Bootable Removable Devices in the	+	Use +/– keys to place the removable devices in the
System	–	boot order you want. Includes Legacy 1.44 MB floppy,
		120 MB floppy etc.

6.3.2.3.6Exit Menu Selections

The following menu options are available on the Exit menu. Use the up and down arrow keys to select an option, and then press the Enter key to execute the option.

	Table 51. Exit Menu Selections
Option	Description
Exit Saving Changes	Exit after writing all modified Setup item values to NVRAM.
Exit Discarding Changes	Exit leaving NVRAM unmodified. User is prompted if any of the setup fields were
	modified.
Load Setup Defaults	Load default values for all SETUP items.
Load Custom Defaults	Load values of all Setup items from previously saved Custom Defaults. NOTE:
	This is hidden if custom defaults are not valid or present.
Save Custom Defaults	Stores Custom Defaults in NVRAM.
Discard Changes	Read previous values of all Setup items from NVRAM.
Save Changes	Write all Setup item values to NVRAM.

66	Revision 1.2
Order Number:	A85874-002