Intel® Server Board SDS2

BIOS

5. Turn on system power.

The system boots from the recovery diskette. The BIOS will beep twice when the update process starts. The system will continue to beep while updating the BIOS. If BIOS update completes successfully, the system will stop beeping. If the update fails, the system will sound an alternating pattern of a buzz and a beep.

When the flash update completes:

1.Turn off system power.

2.Remove the recovery diskette.

3.Restore the recovery jumper to its original position.

4.Turn on system power.

5.Flash any custom blocks such as user binary.

The system should now boot normally using the updated system BIOS.

Revision 1.2

69

Order Number:

A85874-002

Page 83
Image 83
Intel SDS2 manual Bios