Intel SDS2 manual Revision Order Number A85874-002

Errata Listing Intel® Server Board SDS2

13.2 Errata[DD1]

1.Intel® RAID controller SRCMR not yet supported with Intel® Server Board SDS2

Problem:	The Intel RAID Controller SRCMR installed on the Intel Server Board SDS2 is
	currently an unsupported configuration. Intel has induced a failure condition in
	Intel Server Board SDS2 systems configured with the Intel RAID Controller
	SRCMR under extreme workloads during final validation testing. Intel has
	verfied that other Intel RAID controllers and Intel server boards are not affected
	by this issue. The Intel RAID controller SRCMR installed on the Intel Server
	Board SCB2 does not exhibit this failure.
Implication:	The Intel RAID Controller SRCMR installed on the Intel Server Board SDS2 is
	currently not a supported configuration and should not be implemented in a
	production environment. .
Workaround:	None.
Status:	Will not fix .

2.Intel® Server Board SDS2 BIOS update utility does not allow updates from a PXE Server or from network drives

Problem:	The current Intel Server Board SDS2 BIOS update utility (PhoenixPhlash) does
	not allow the BIOS updates to be performed from a PXE server or from a
	network drive.
Implication:	The Intel Server Board SDS2 BIOS cannot be updated from a PXE server or a
	network drive. The BIOS update must be performed from a floppy diskette or
	from a hard drive.
Workaround:	None.
Status:	Fixed. SDS2 BIOS Production Release 2.1 (Build 44) adds support for the Intel
	iFLASH BIOS update utility. The iFLASH BIOS update utility has the ability to
	perform BIOS updates from a PXE server or from network drives.

3.Intel® Server Board SDS2 FRU/SDR update fails with console redirection enabled in BIOS Setup

Problem:	When using Intel Server Board SDS2 BIOS Production Release 2 (Build 41),
	BMC v. 28, and FRU/SDR files v. 5.0.A, if console redirection is set to Enabled

108	Revision 1.2
Order Number:	A85874-002