BIOS | Intel® Server Board SDS2 |
This file is loaded into the PHLASH program with the /b=<bin file>.
The disk created by the BIOS.EXE program automatically runs “PHLASH /s /b=PLATCXLU.BIN command” in
Once an update of the system BIOS is complete, the user is prompted for a reboot. The user binary area is also updated during a system BIOS update. User binary can be updated independently of the system BIOS. CMOS is cleared when the system BIOS is updated.
6.4.2User Binary Area
The BIOS flash ROM includes a 16 KB area in flash for
6.4.3Language Area
The system BIOS language area can be updated only by updating the entire BIOS. The BIOS supports English, Spanish, French, German, and Italian. These languages are selectable using Setup.
6.4.4OEM Logo Screen
A 128 KB region of Flash ROM is available to store the OEM logo in compressed format. The BIOS contains the standard Intel logo. Using the Phoenix* PHLASH utility, this region can be updated with an OEM supplied logo image. The OEM logo must fit within 640 X 384 size. If an OEM logo is flashed into the system, it overrides the built in Intel logo.
6.4.5Recovery Mode
The SDS2 baseboard supports a method for performing a BIOS recovery in order to restore the system from a failed flash. This utilizes a jumper on the baseboard. The system beeps through out the process. The recovery BIOS boots only from a 1.44 MB floppy diskette inserted into a
1.44MB floppy drive or
Note: The user must make the Recovery floppy diskette following the instructions included in the release notes. Failure to do so will cause the process to fail.
6.4.5.1Performing BIOS Recovery
The follow procedure boots the recovery BIOS and flashes the normal BIOS.
1.Prepare a BIOS recovery diskette by following the instructions included with the BIOS release.
2.Turn off system power.
3.Move the BIOS recovery jumper to the recovery position.
4.Insert the BIOS recovery diskette.
68 | Revision 1.2 |
Order Number: |