STARTING AND STOPPING THE SYSTEM
Automatic print job recovery
When a jam occurs, the Printer Controller performs a job recovery. In more severe conditions, the printer reinitiates a system status check.
If HCU errors occur while printing over a channel, reboot the Sun workstation and the HCU. Job recovery restarts and resumes at the last checkpoint held by the host.
Rebooting the Printer Controller
To reboot your Printer Controller without powering it off, follow these steps:
1.With the pointer in the desktop background area of the monitor screen (not in a window or on an icon), press the right mouse button to display the workspace
2.Select Restart.
Exiting power saver mode
If your IPS is left idle for a predetermined amount of time (set by your service representative at installation), the system goes into power saver mode and a
•
•
Press any key to redisplay the monitor screen.
Press the Continue button on the printer control console before sending jobs from the host. This notifies PSF that the printer is in the Ready state.
XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |
