Xerox 4050 IPS, 4090 IPS manual Changing a DFA profile, Deleting a DFA profile

SETTING THE SYSTEM CONFIGURATION

Changing a DFA profile

To make changes to an existing DFA profile:

1.From the DFA Profile pull-down menu on the IPS main window (below the Output Configuration pull-down menu), select the name of the profile you want to change.

2.On the Output DFA Profile window, make changes to the parameters as desired. (Refer to the “Adding a DFA output personality profile” section earlier in this chapter, for explanations of the items in this window.)

3.Click Save to save the updated DFA profile.

4.If you want to put the updated profile into effect immediately, click Apply & Save.

5.Click Quit to return to the IPS main window.

Deleting a DFA profile

To delete a DFA profile:

1.From the DFA Profile pull-down menu on the IPS main window (below the Output Configuration pull-down menu), select the name of the profile you want to delete.

2.On the Output DFA Profile window, click the Delete button. A Delete File confirmation prompt window displays.

3.On the prompt window, click Delete. The deleted profile is removed from the DFA Profile pull-down menu.

4.Click Quit to return to the IPS main window.

XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 4-61