Xerox 4050 IPS, 4090 IPS manual Adding a DFA profile, DFA Profile pull-down menu

SETTING THE SYSTEM CONFIGURATION

Adding a DFA profile

The values you enter for a DFA profile are provided by the vendor of your finishing equipment, except the Set Media Modification (SMM) values for Finishing Functions 1 and 2 (if used). The SMM values are specified in the job by your applications programmer.

To create a new DFA profile:

1.Locate the DFA Profile pull-down menu on the IPS main window (below the Output Configuration pull-down menu).

Figure 4-46.DFA Profile pull-down menu

Note: The DFA Profile menu displays only if you have DFA enabled on your IPS.

2.From the DFA Profile pull-down menu, select any name to use as a base for the new profile. (You will rename the new file, so the existing file you selected to build from will not be changed.)

Figure 4-47.DFA Profile Name pull-down menu

XEROX DOCUPRINT 4050/4090 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 4-57