Intel manual Summary Errata Table, Errata Listing Intel Server Board SDS2, Errata Summary

Errata Listing Intel® Server Board SDS2

13. Errata Listing

13.1 Summary Errata Table

The following tables indicate the errata and the document changes that apply to the Intel® Server Board SDS2. Intel intends to fix some of the errata in a future stepping of components, and to account for the other outstanding issues through documentation or specification changes as noted. The tables use the following notations:

Fix: Intel intends to fix this erratum in a future release of the component.

Fixed: This erratum has been previously fixed.

NoFix: There are no plans to fix this erratum.

		Table 91. Errata Summary
No.	Plans	Description of Errata
1.	Fixed	Intel® RAID controller SRCMR not yet supported with Intel® Server Board SDS2
2.	Fixed	Intel® Server Board SDS2 BIOS update utility does not allow updates from a PXE server or from
		network drives
3.	Fixed	Intel® Server Board SDS2 FRU/SDR update fails with console redirection enabled in BIOS Setup
4.	Fixed	First characters and arrow keys not echoed with console redirection
5.	Fixed	Intel® & ICP Vortex* RAID Controllers will cause the Intel® Server Board SDS2 to halt during POST
		when the BIOS Logo screen is enabled
6.	Fixed	Intel® Server Board SDS2 CD-ROM issues
7.	Fixed	NIC driver set 5.12 v.2.3.25 for UnixWare* 7.1.1 drops DPC LAN connection
8.	Fixed	NIC driver set 5.12 v.5.41.27 for Microsoft* Windows* 2000 prevents a DPC LAN connection when
		the operating system is loaded
9.	Fixed	Extended RAM step disable option in BIOS Setup has no effect
10.	Fixed	High resolution video modes do not work correctly
11.	Fixed	Lower performance with CAS Latency 2 memory
12.	Fixed	SDS2 reboots during POST with 4GB or more of total system memory installed
13.	Fixed	Novell NetWare* v. 6.0 does not install on SDS2
14.	Fixed	Adaptec* 2100S RAID controller causes system lockup and video blanking
15.	Fixed	SDS2 Build Your Own (BYO) Platform Confidence Test (PCT) v. 1.00 fails on first test run
16.	NoFix	SDS2 0B71: System temperature out of the range POST message
17.	Fixed	SDS2 0B75: System Voltage out of the range POST message
18.	Fixed	Mixcellaneous numeric keys entered during POST will enable PXE boot
19.	Fixed	SDS2 board level operating temperature and power supply voltage tolerance modification
	Fab 5
20.	Fixed	Recommendation for SDS2 rubber bumper installation is on the base SC5200 Chassis
	Fab 5
106		Revision 1.2
		Order Number: A85874-002