![](/images/backgrounds/293017/hp-v1910-users-manual-120219385x1.png)
Item | Description | ||
| Specify the unit for data packets sent to the RADIUS server, which | ||
| can be | ||
Unit of Packets | ∙ | ||
∙ | |||
|
∙
∙
3.Relationship between the
Number of users | |
1 to 99 | 3 |
|
|
100 to 499 | 6 |
|
|
500 to 999 | 12 |
|
|
ƒ1000 | ƒ15 |
|
|
Return to RADIUS configuration task list.
RADIUS configuration exampleNetwork requirements
As shown in a, configure the switch to let the RADIUS server authenticate and keep accounts on the user (record the online duration of the Telnet user).
On the RADIUS server (a CAMS or iMC server, using the default port for authentication and accounting), the Telnet user’s username and password and the shared key expert have been configured for packet exchange with the switch.
On the switch, it is required to configure the shared key for packet exchange with the RADIUS server as expert, and configure the system to remove the domain name of a username before sending it to the RADIUS server.
a.Network diagram for RADIUS server configuration
Configuration procedure
NOTE:
Enable the Telnet server function, and configure the switch to use AAA for authentication, authorization and accounting of Telnet users.Detailed configuration steps are omitted here.
Table 136 Configure IP addresses for the interfaces. Detailed configuration steps are omitted here. Table 137 Configure RADIUS scheme system