HP V1910 manual Configuring priority mapping tables, For configuring line rate on a port, Cir

a.The page for configuring line rate on a port

2 describes the configuration items of configuring line rate on a port.

2.Configuration items of configuring line rate on a port

Item	Description
	Select the types of interfaces to be configured with line rate.
Please select an interface type	The interface types available for selection depend on your device
	model.
Rate Limit	Enable or disable line rate on the specified port.
	Select a direction in which the line rate is to be applied.
	∙ Inbound—Limits the rate of packets received on the specified port.
Direction	∙ Outbound—Limits the rate of packets sent by the specified port.
	∙ Both—Limits the rate of packets received on and sent by the
	specified port.
CIR	Set the committed information rate (CIR), the average traffic rate.
	Specify the ports to be configured with line rate
Please select port(s)	Click the ports to be configured with line rate in the port list. You can
	select one or more ports.

Return to Line rate configuration task list.

Configuring priority mapping tables

Select QoS  Priority Mapping from the navigation tree to enter the page shown in a.

444