HP Comprehensive Guide on LLDP and Port Configuration Settings

b.The page for modifying LLDP settings on ports in batch

2. Port LLDP configuration items

Item		Description
Interface Name		Displays the name of the port or ports you are configuring.
		Displays the LLDP enabling status on the port you are
LLDP State		configuring.
		This field is not available when you batch-configure ports.
		Set the LLDP operating mode on the port or ports you are
		configuring:
	LLDP Operating Mode	∙ TxRx—Sends and receives LLDPDUs.
		∙ Tx—Sends but not receives LLDPDUs.
		∙ Rx—Receives but not sends LLDPDUs.
		∙ Disable—Neither sends nor receives LLDPDUs.
Basic Settings		Set the encapsulation for LLDPDUs:
		∙ ETHII—Encapsulates outgoing LLDPDUs in Ethernet II frames
		and processes an incoming LLDPDU only if its encapsulation
		is Ethernet II.
	Encapsulation Format	∙ SNAP—Encapsulates outgoing LLDPDUs in Ethernet II
		frames and processes an incoming LLDPDU only if its
		encapsulation is Ethernet II.
		IMPORTANT:
		LLDP-CDP PDUs use only SNAP encapsulation.
		227