2.DHCP server group configuration items
Item | Description | |
Server Group ID | Type the ID of a DHCP server group. | |
You can create up to 20 DHCP server groups. | ||
| ||
|
| |
| Type the IP address of a server in the DHCP server group. | |
IP Address | The server IP address cannot be on the same subnet as the IP address of the DHCP | |
| relay agent; otherwise, the client cannot obtain an IP address. | |
|
|
Return to DHCP relay agent configuration task list.
Enabling the DHCP relay agent on an interfaceSelect Network DHCP from the navigation tree to enter the default DHCP Relay page shown in a. In the
Interface Config field, the DHCP relay agent state of interfaces is displayed. Click the icon of a specific interface to enter the page shown in a.
a.Configure a DHCP relay agent interface
2.DHCP relay agent interface configuration items
Item | Description | |
Interface Name | This field displays the name of a specific interface. | |
|
| |
DHCP Relay | Enable or disable the DHCP relay agent on the interface. | |
|
| |
| Enable or disable IP address check. | |
Address Match Check | With this function enabled, the DHCP relay agent checks whether a requesting | |
client’s IP and MAC addresses match a binding (dynamic or static) on the | ||
| DHCP relay agent. If not, the client cannot access outside networks via the | |
| DHCP relay agent. This prevents invalid IP address configuration. | |
|
| |
Server Group ID | Correlate the interface with a DHCP server group. | |
A DHCP server group can be correlated with multiple interfaces. | ||
| ||
|
|
Return to DHCP relay agent configuration task list.
283