Creating a static ARP entry
Select Network ARP Management from the navigation tree to enter the default ARP Table page shown in a. Click Add to enter the New Static ARP Entry page. Select the Advanced Options checkbox to expand advanced configuration items, as shown in a.
a.Add a static ARP entry
2 describes the static ARP entry configuration items.
2.Static ARP entry configuration items
Item | Description |
IP Address | Type an IP address for the static ARP entry. |
|
|
MAC Address | Type a MAC address for the static ARP entry. |
|
|
VLAN ID
Advanced
Options
Port
Type a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the port must belong to the VLAN. The corresponding VLAN interface must have been created.
Static ARP configuration example
Network requirements
As shown in a, hosts are connected to Switch A, which is connected to Router B through interface GigabitEthernet 1/0/1 belonging to VLAN 100. The IP address of Router B is 192.168.1.1/24. The MAC address of Router B is
To enhance communication security between Switch A and Router B, static ARP entries need to be configured on Switch A.
309