a.Display entry information
b.Information about an IGMP snooping multicast entry
2.Description of IGMP snooping multicast entries
Item | Description |
VLAN ID | ID of the VLAN to which the entry belongs |
|
|
Source Address | Multicast source address, where 0.0.0.0 indicates all multicast sources. |
|
|
Group Address | Multicast group address |
|
|
Router Port(s) | All router ports |
|
|
Member Port(s) | All member ports |
|
|
Return to Configuration task list.
IGMP snooping configuration exampleNetwork requirements
∙As shown in a, Router A connects to a multicast source (Source) through Ethernet 1/2, and to Switch A through Ethernet 1/1.
∙The multicast source sends multicast data to group 224.1.1.1. Host A is a receiver of the multicast group.
∙IGMPv2 runs on Router A and IGMP snooping version 2 runs on Switch A.
∙The function of dropping unknown multicast packets is enabled on Switch A to prevent Switch A from flooding multicast packets in the VLAN if no corresponding Layer 2 forwarding entry exists.
∙The fast leave function is enabled for GigabitEthernet 1/0/3 on Switch A to improve bandwidth and resource usage.
259