![](/images/backgrounds/293017/hp-v1910-users-manual-120219433x1.png)
Item | Description | ||
| Destination Mask |
| |
|
|
| |
COS(802.1p precedence) | Specify the 802.1p precedence for the rule. | ||
|
|
| |
| LSAP Type | Select the LSAP Type option and specify the DSAP and SSAP fields in the LLC | |
|
| encapsulation by configuring the following items: | |
|
| ∙ LSAP | |
| LSAP Mask | ∙ LSAP | |
Type Filter |
|
| |
Protocol Type | Select the Protocol Type option and specify the link layer protocol type by | ||
| |||
| configuring the following items: | ||
|
| ||
|
| ∙ Protocol | |
|
| ||
| Protocol Mask | field of Ethernet_II and Ethernet_SNAP frames. | |
| ∙ Protocol | ||
|
| ||
|
|
| |
Time Range | Select the time range during which the rule takes effect. | ||
Available time ranges are those that have been configured. | |||
|
| ||
|
|
|
Return to IPv4 ACL configuration task list.
Configuration guidelines
When configuring an ACL, follow these guidelines:
Table 147 When defining rules in an ACL, you do not necessarily assign them numbers; the system can do this automatically. For more information, see ACL step.
Table 148 You cannot create a rule with, or modify a rule, to have the same permit/deny statement as an existing rule in the ACL.
Table 149 You can only modify the existing rules of an ACL that uses the match order of config. When modifying a rule of such an ACL, you may choose to change just some of the settings, in which case the other settings remain the same.
421