HP V1910 Configuring line rate on a port, Return to Queue scheduling configuration task list, Wrr

2 describes the configuration items of configuring queue scheduling on a port.

2.Configuration items of configuring queue scheduling on a port

ItemDescription

WRR Setup

	Enable or disable the WRR queue scheduling mechanism on selected ports. Two
WRR	options are available:
	∙ Enable—Enables WRR on selected ports.
	∙ Not Set—Restores the default queuing algorithm on selected ports.
	Select the queue to be configured.
Queue	Its value range is 0 to 7, but only 0 to 3 is user configurable and 4 to 7 are
	reserved.
	Specify the group the current queue is to be assigned to.
	This drop-down list is available after you select a queue ID. The following groups
Group	are available for selection:
	∙ SP—Assigns a queue to the SP group.
	∙ 1—Assigns a queue to WRR group 1.
	∙ 2—Assigns a queue to WRR group 2.

Weight	Set a weight for the current queue.
	This option is available when group 1 or group 2 is selected.
Please select port(s)	Click to select ports to be configured with queuing on the chassis front panel.

Return to Queue scheduling configuration task list.

Configuring line rate on a port

Select QoS  Line rate from the navigation tree and click the Setup tab to enter the line rate configuration page, as shown in a.

443