HP V1910 Creating a link aggregation group, Dynamic aggregation group configuration task list

1.Dynamic aggregation group configuration task list

Task	Remarks
	Required
	Create a dynamic aggregate interface and configure
	member ports for the dynamic aggregation group
Creating a link aggregation group	automatically created by the system when you create the
	aggregate interface. LACP is enabled automatically on all the
	member ports.
	By default, no link aggregation group exists.
Displaying information of an aggregate	Optional
	Perform this task to view detailed information of an existing
interface
	aggregation group.
	Optional
	Perform the task to set LACP priority for the local system and
	link aggregation member ports.
Setting LACP priority	Changes of LACP priorities affect the Selected/Unselected
	state of link aggregation member ports.
	The default port LACP priority and system LACP priority are
	both 32768.
	Optional
Displaying information of LACP-enabled ports	Perform the task to view detailed information of
	LACP-enabled ports and the corresponding remote (partner)
	ports.

Creating a link aggregation group

Select Network  Link Aggregation from the navigation tree, and click the Create tab to enter the page as shown in a.

209