∙Select the Static (LACP Disabled) option as the aggregate interface type.
∙Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the chassis front panel.
∙Click Apply.
Table 55 Approach 2: Create a dynamic link aggregation group
# Create dynamic link aggregation group 1.
Select Network Link Aggregation from the navigation tree, and click the Create tab to enter the page as shown in c.
c.Create dynamic link aggregation group 1
∙Set the link aggregation interface ID to 1.
∙Select the Dynamic (LACP Enabled) option as the aggregate interface type.
∙Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the chassis front panel.
∙Click Apply.
216