HP V1910 manual Create VLAN-interface, 312

# Create VLAN-interface 100.

∙Select Network  VLAN Interface from the navigation tree, click the Create tab, and then perform the following operations, as shown in d.

d.Create VLAN-interface 100

∙Type 100 for VLAN ID.

∙Select the Configure Primary IPv4 Address checkbox.

∙Click on the Manual radio botton.

∙Type 192.168.1.2 for IPv4 Address.

∙Select 24 (255.255.255.0) for Mask Length.

∙Click Apply to complete the configuration.

# Create a static ARP entry.

∙Select Network  ARP Management from the navigation tree to enter the default ARP Table page. Click Add Perform the following operations, as shown in e.

312