e warnings and the assembly sult in serious injury or death.
PARTS LIST
CHECK that you have all the parts listed below BEFORE assembling your swing. If any parts are missing, call Customer Service at
Tools required: Screwdriver and wrench
(wrench included)
Infant carrier |
| Cradle |
|
|
|
ous injury from falling or Always use seat belt is in the infant carrier.
use INFANT CARRIER ighs over 25 pounds Maximum weight for s 13 pounds (5.9 kg).
DO NOT use the infant carrier as a car seat. This infant carrier is not designed for use in a vehicle.
Strings can cause strangulation. DO NOT place items with a string around your child’s neck, such as hood strings or pacifier cords. DO NOT sus- pend strings over cradle or infant car- rier or attach strings to toys.
Motor unit Plastic leg brace (2)
Screw (2)
Hanger
Wrench | Acorn nut (2) Leg tip (4) |
Round end
Oval end
Upper leg section (4)
Wire end | Round end |
Lower leg section (4)
SSEMBLY INSTRUCTIONS CAREFULLY. If you experience any please contact the Customer Service Department.
SE CRADLE as a
NUE USING YOUR CRADLE OR INFANT CARRIER when child o active.
NUE USING YOUR CRADLE OR INFANT CARRIER should it maged or broken.
UCT IS NOT INTENDED FOR COMMERCIAL USE. 3
CARE AND MAINTENANCE
FROM TIME TO TIME CHECK YOUR SWING for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Graco® replacement parts.
REMOVABLE CLOTH SEAT COVER may be machine washed in lukewarm water on delicate cycle and
TO CLEAN SWING FRAME, use only household soap or detergent and warm water. NO BLEACH.
EXCESSIVE EXPOSURE TO SUN OR HEAT could
cause fading or warping of parts.
4
