HP V1910 manual Work mechanism of Igmp snooping, When receiving a general query, 252

a.IGMP snooping related ports

Router A	Switch A	Receiver
	GE1/0/1	GE1/0/2
	GE1/0/3	Host A
		Host B
	GE1/0/1	Receiver
Source		GE1/0/2

Switch B	Host C
Router port
Member port
Multicast packets	Host D

IGMP snooping related ports include:

∙Router port: A router port is a port on an Ethernet switch that leads the switch towards the Layer 3 multicast device (DR or IGMP querier). In the figure, GigabitEthernet 1/0/1 of Switch A and GigabitEthernet 1/0/1 of Switch B are router ports. A switch registers all its local router ports in its router port list.

∙Member port: On an Ethernet switch, a member port (also known as multicast group member port) connects the switch to a multicast group member. In the figure, GigabitEthernet 1/0/2 and GigabitEthernet 1/0/3 of Switch A and GigabitEthernet 1/0/2 of Switch B are member ports. A switch registers all its member ports in the IGMP snooping forwarding table.

NOTE:

∙In this document, a router port is a port on the switch that leads the switch to a Layer 3 multicast device, rather than a port on a router.

∙Unless otherwise specified, router ports and member ports in this document consist of dynamic and static ports.

∙An IGMP snooping enabled switch deems that all its ports on which IGMP general queries with the source address other than 0.0.0.0 or PIM hello messages are received to be router ports.

Work mechanism of IGMP snooping

A switch running IGMP snooping performs different actions when it receives different IGMP messages, as follows:

CAUTION:

You can add or delete only dynamic ports rather than static ports.

When receiving a general query

The IGMP querier periodically sends IGMP general queries to all hosts and routers (224.0.0.1) on the local subnet to find out whether any active multicast group members exist on the subnet.

252