HP V1910 manual Configure the voice Vlan function globally, 163

c.Configure the voice VLAN function globally

∙Select Enable in the Voice VLAN security drop-down list. You can skip this step, because the voice VLAN security mode is enabled by default.

∙Set the voice VLAN aging timer to 30 minutes.

∙Click Apply.

# Configure voice VLAN on GigabitEthernet 1/0/1.

∙Click the Port Setup tab to enter the page shown in d. d. Configure voice VLAN on GigabitEthernet 1/0/1

∙Select Auto in the Voice VLAN port mode drop-down list.

∙Select Enable in the Voice VLAN port state drop-down list.

∙Type voice VLAN ID 2.

∙Select GigabitEthernet 1/0/1 on the chassis front panel.

∙Click Apply.

# Add OUI addresses to the OUI list.

∙Click the OUI Add tab to enter the page shown in e.

163