HP V1910 Displaying information of LACP-enabled ports, Lacp priority configuration items, 212

a.The Setup tab

After finishing each configuration item, click the right Apply button to submit the configuration. 2 describes the configuration items.

2.LACP priority configuration items

Item	Description
Select LACP enabled port(s) parameters	Set a port LACP priority.
	Select the ports where the port LACP priority you set will
Select port(s) to apply Port Priority	apply on the chassis front panel.
	You can set LACP priority not only on LACP-enabled ports but
	also on LACP-disabled ports.
System Priority	Set the LACP priority of the local system.

Return to Dynamic aggregation group configuration task list.

Displaying information of LACP-enabled ports

Select Network  LACP from the navigation tree. The Summary tab is displayed by default, as shown in a.

212