Buhler 2360, 2335, 2425, 2290, 2375 manual Check the Wheel Hardware Torque, Configuration Torques

SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 250 HOURS

Auxiliary rear weight kit - Check the weight mounting nuts, 1, securing the weights to the weight bracket and torque to 480 N⋅m (354 ft. lbs.). Check the six nuts (three on each bracket) securing the bracket to the tractor and torque to 633 N⋅m (467 ft. lbs.). Check the tie rod nuts, 2, and torque to 633 N⋅m (467 ft. lbs.).

1

2

Figure 3-52

OPERATION 33

Check the Wheel Hardware Torque

All wheel mounting hardware must be checked for proper torque. The following chart shows wheel torques, based on wheel configuration.

NOTE: For identification of particular hardware components, see Operation 75 later in this section.

CONFIGURATION	TORQUES
Singles	Wheel to Hub Nuts 710 N⋅m (525 ft. lbs.)
Special Tie Rod Duals	Wheel to Hub Nuts 710 N⋅m (525 ft. lbs.)
	Backing Nuts 440 N⋅m (325 ft. lbs.)
	Outer Wheel Nuts 300 N⋅m (220 ft. lbs.)
	Jam Nuts 320 N⋅m (235 ft. lbs.)
Standard Tie Rod Duals	Wheel to Hub Nuts 710 N⋅m (525 ft. lbs.)
	Outer Wheel Nuts 300 N⋅m (220 ft. lbs.)
	Jam Nuts 320 N⋅m (235 ft. lbs.)
Standard and Special Row Crop	Wheel to Hub Nuts 710 N⋅m (525 ft. lbs.)
Drum Duals
Drum Style Triples	Wheel to Hub Nuts 710 N⋅m (525 ft. lbs.)
	Center Wheel to Outer Wheel Nuts 710 N⋅m (525 ft. lbs.)

3-39