Buhler 2360, 2335, 2425, 2290, 2375 manual Remote Control Operation, 126

SECTION 2 - OPERATION

REMOTE CONTROL OPERATION

Four remote hydraulic control levers are located on the right console. These are color-coded to match the quick couplers at the rear of the tractor. The colors should be (from left to right), blue, 1; green, 2; tan, 3; and gray, 4.

3	4
2
1
	Figure 2-164

The levers have four positions: neutral, 1; extend (or raise), 2; retract (or lower), 3; and float, 4, as indicated by the decals. When not in use, the levers should be in the neutral position where they can be locked to prevent accidental actuation.

4

3

1

2

Figure 2-165

For the extend position, the lever, 1, is pulled toward the operator. This is normally the implement raise position. An adjustable pressure release detent will hold the lever in the raised position until the cylinder reaches the end of its travel, then release to the neutral position. The lever lockout has no function in this position.

1

Figure 2-166

2-126