SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 1500 HOURS OR YEARLY

Powershift Transmission (with or without PTO option) - Operate the tractor a sufficient amount of time to warm up the transmission oil. Remove the drain plug, 1, from the lower left hand rear location on the transmission housing and allow the oil to drain into a pan.

Replace the drain plug and tighten. Refill the transmission with new oil through the fill tube to the proper level as indicated by the dipstick.

1

Figure 3-84

On powershift tractors with a PTO, the PTO clutch housing will also require draining. To do this, remove the hose, 1, from the bottom of the clutch housing and allow the oil to drain from the clutch. Reattach the hose after the oil is removed. Tighten the hose fitting.

1

Figure 3-85

3-55

Page 279
Image 279
Buhler 2360, 2335, 2425, 2290, 2375 manual Every 1500 Hours or Yearly