Buhler 2425, 2335, 2290, 2375, 2360 manual Operation

SECTION 2 - OPERATION

Position Three - “Roadway Use” - When the rotary switch is in this position, the front and rear roof-mounted amber warning lights and the taillights mounted on the rear fenders will continue to work as described in position two (as will the wide transport marker lights). In addition, the left and right outermost headlights, 1, mounted above the front grille, will be lit.

The grille-mounted headlights are adjustable left and right, and up and down, without loosening any hardware.

The background lights on the operator’s control panel behind the engine oil pressure and engine coolant temperature gauges, as well as the background light behind the fuel gauge and powershift gear display, if equipped, mounted on the right front cab post, will light. The small amber console light on the right front cab post under the fuel gauge, and the background light in the performance monitor display window will also be lit.

NOTE: If the multifunction switch is put in the “High/Low Beam” position, the right and left inner headlights mounted above the front grille will turn off and on, depending on beam selection.

When the high beam position is selected, a blue indicator light will light on the warning light bar indicating that the high beams are on.

WARNING: FOR YOUR PROTECTION, USE THE HAZARD WARNING LIGHTS WHEN TRAVELING ON PUBLIC ROADS, UNLESS PROHIBITED BY LAW

11

Figure 2-60

2-43