SECTION 2 - OPERATION
Gear Shifting within a Range
IMPORTANT: It is recommended that shifting on the fly be limited to light draft or rolling loads and only within a gear range. Do not attempt to shift between ranges without first coming to a complete stop.
1.Depress the clutch pedal fully.
2.Move the gearshift lever, 1, to the proper gear. Shift pattern decals, 2, are located below the shift lever indicating gear position and a speed chart decal is located on the right window of the cab.
NOTE: It is not necessary to reduce engine speed for shifts within a range, but is recommended to increase the life of shift components.
3.Release the clutch pedal slowly to insure a smooth transmission engagement.
NOTE: While it is possible to shift on the fly within a range, under heavy loads the tractor will probably come to an abrupt stop before the shift is complete. For your safety, it is recommended that the operator throttle down, raise any implements, and stop before attempting any shifts.
The gearshift decal located behind the gearshift lever displays the gearshift lever position during operation (1 - 2 - 3 - 4).
Forward/Reverse Shifting
Shuttle shifting should not be attempted between the forward and reverse ranges while the tractor is still moving. Harsh transmission engagement will occur as well as damage to the range shift mechanisms in the transmission.
1.Bring the tractor to a complete stop before shifting the range lever.
2.Select the range desired.
3.Release the clutch pedal slowly to achieve a smooth start.
1
2
Figure
Figure
