Buhler 2425, 2335, 2290, 2375 Check the Windshield Washer Fluid, Change the Windshield Wiper Blades

SECTION 3 - LUBRICATION AND MAINTENANCE

AS REQUIRED

OPERATION 70

Check the Windshield Washer Fluid

To replenish the windshield washer fluid, turn the latch on the SMV sign on the rear of the cab. Allow the sign to pivot outward. Remove the lid, 1, on the reservoir and add fluid as necessary.

1

Figure 3-118

OPERATION 71

Change the Windshield Wiper Blades

The front and rear windshield wiper blades can be changed using the following procedure:

1

Pivot the wiper arm outward away from the window. Remove the blade bolt, 1, from the center of the blade. Install the new blade and reinstall the center bolt.

Figure 3-119

The front windshield wiper blade is 457 mm (18″) long and the rear wiper blade is 660 mm (26″) long.

The small screws, 1, can be loosened to adjust the blade angle, which should be parallel to the edge of the window. Retighten the screws when the blade is adjusted properly.

1

Figure 3-120

3-72