Buhler 2335, 2425, 2290, 2375, 2360 manual Drawbar Positioning, PTO Option, 142

SECTION 2 - OPERATION

When the sway block, 1, is in the non-sway position, it is rotated 90° so that the narrow portion of the block is turned away from the lower link and the block is of equal thickness from top to bottom.

To convert the block from the sway to the non-sway position, or vice versa, loosen and remove the two attaching bolts, 1, from inside the drawbar cage. Rotate the block to the desired position, and reinstall the attaching bolts. Torque the bolts to 270 N⋅m . (200 ft. lbs)

Drawbar Positioning

To eliminate interference between the drawbar and mounted implement, lock the drawbar into the middle position.

PTO (Option)

IMPORTANT: The 3-point hitch must be in the non-sway position to use the PTO.

When using the PTO to power 3-point hitch mounted implements, put the hitch into the non-sway position with sway blocks to prevent damage to the PTO drivelines and universal joints.

1

Figure 2-199

1

Figure 2-200

2-142