Buhler 2375, 2335, 2425, 2290, 2360 manual Quad Shift III Shifting, Range Shifting

SECTION 2 - OPERATION

QUAD SHIFT III SHIFTING

Range Shifting

1.Be sure the engine speed is below 1700 RPM. Whenever possible, reduce engine speed to idle.

2.Depress the clutch fully and bring the tractor to a complete stop. Place the range shift lever, 1, in neutral. Wait three to four seconds to allow the gears to slow down to a near stopped condition. Select the desired range. Shift pattern decals, 2, are located behind the shift lever indicating range position. A decal on the right cab window gives the range and gear position for speed selections based on tire size options.

3.If you are not able to move to the desired position, turn the steering wheel to the left or right to allow gears to mesh.

4.Slowly release the clutch pedal to achieve a smooth start.

5.Reset the engine speed to operating range.

The range shift decal located behind the range shift lever displays the position the range shift lever should be in for high (H), medium (M), low (L), or reverse (R) range.

1

2

Figure 2-50

Figure 2-51

2-35