SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 1000 HOURS

Inspect the seal, 1, on both new elements before installing. Cracks or chips in the element sealing rubber indicate that the element is defective and must be replaced.

Install the elements into the canister. Be sure that the seal on the end of the filters fully contacts the air cleaner body. The wing nuts, 1, have a small seal on the inner face which should be in good condition before the wing nuts are tightened. If the seals on the wing nuts are damaged, replace them. Tighten the nuts securely.

NOTE: Contact your Buhler Versatile dealer to obtain the correct filter part numbers.

1

Figure 3-75

1

Figure 3-76

OPERATION 51

Change the Cab Air Filter

The cab air filter, 1, located on the rear of the cab must be changed periodically to keep the cab air system operating at maximum efficiency.

1

Figure 3-77

3-52

Page 276
Image 276
Buhler 2425, 2335, 2290, 2375, 2360 manual Change the Cab Air Filter