Buhler 2335, 2425, 2290, 2375, 2360 manual Point Hitch, Brakes

SECTION 4 - TROUBLESHOOTING

3-POINT HITCH

PROBLEM	POSSIBLE CAUSE	CORRECTION
Hitch will not raise	Low oil level.	Check and fill hydraulic reservoir.
	Loose electrical connections.	Check connections at
		electrohydraulic valve and
		controls.
	Blown fuse.	Replace fuse.
Hitch raises too slowly or	Rate of raise adjustment	Adjust flow control on 3-point
quickly	incorrectly set.	hitch valve section.
Hitch drops too slowly or	Lowering rate adjustment	Adjust rate of lowering flow
quickly	incorrectly set.	control knob.
Hitch overstrokes during	Feedback potentiometer	Adjust potentiometer.
raise or lower and puts the	incorrectly adjusted.
pump into high pressure
standby
	BRAKES
PROBLEM	POSSIBLE CAUSE	CORRECTION
Park brake inoperative	Worn brake pads.	Replace brake pads.
	Broken park brake cable.	Replace broken cable.
	Brake out of adjustment.	Operate park brake lever several
		times to automatically adjust
		brakes. If no result, contact your
		Buhler Versatile dealer.
Pedal bottoms out or feels	Brake piston seal leaking.	Contact Buhler Versatile dealer.
mushy	Worn brake pads.	Replace brake pads.
	Brake bleeder not sealing.	Tighten bleeder.
	Leakage in brake valve.	Contact Buhler Versatile dealer.
	Air in system.	Bleed brake system.
	Reservoir level low.	Fill reservoir with proper brake
		fluid.
	Brakes out of adjustment.	Operate park brake lever several
		times to automatically adjust. If no
		result, contact Buhler Versatile
		dealer.

4-11