Buhler 2375, 2335, 2425, 2290, 2360 manual Quick Hitch Installation Optional Category III/IVN, 145

SECTION 2 - OPERATION

Quick Hitch Installation

(Optional - Category III/IVN)

CAUTION: BE SURE NO ONE IS BETWEEN

THE IMPLEMENT AND TRACTOR WHEN

BACKING UP.

An optional quick hitch is available to attach to the Category III/IVN 3-point hitch that allows quick attachment of implements to the tractor. To use the quick hitch, proceed as follows:

The 3-point hitch can be set for Category III or Category IVN with the quick hitch. If Category III is used , it will be necessary to remove the bushings in the link pins. The quick hitch uses Category IVN pins.

Connect the quick hitch, 1, to the upper and lower
hitch points of the 3-point hitch with pins and
cotter pins.	1

Figure 2-207

The upper implement attaching point of the quick hitch must be positioned properly for either a Category III or a IVN implement. Remove the eight attaching bolts, 1, from the quick hitch frame and position the bracket properly for the implement to be used.

NOTE: When Category III implements are attached to the quick coupler, proper bushings must be used to adapt the coupler to the implement. The coupler attaching points are set up for Category IV implements.

1

Figure 2-208

2-145