Buhler 2335, 2425, 2290, 2375, 2360 manual 152

SECTION 2 - OPERATION

10.The hitch can be put into the float mode any time the system is in the automatic mode. Rotate the rotary depth control knob to the “F” position until it detents. The hitch will now follow the ground contour. Pressing the top of the auto raise/lower switch will cause the hitch to fully raise, and pressing the bottom of the switch will return the hitch to the float position.

WARNING: DO NOT SET THE ROTARY DEPTH CONTROL KNOB TO THE FLOAT POSITION WHEN IN THE AUTOMATIC MODE UNLESS THE IMPLEMENT

WEIGHT IS ON THE GROUND. IF THE KNOB IS SET IN THE FLOAT POSITION WITH THE IMPLEMENT RAISED, IT WILL DROP QUICKLY, POSSIBLY CAUSING DAMAGE.

11.When transporting implements, set the rotary depth control to the fully raised position (10). Place the hitch in the automatic mode and press the top of the auto raise/lower switch to raise the hitch. Do not use auto or move the rotary depth control knob as the hitch may drop during transport.

2-152