Buhler 2290, 2335, 2425, 2375, 2360 manual Every 1000 Hours

SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 1000 HOURS

To remove the cab air filter, lift up on the filter frame handle, 1, and unhook the latch, 2. Allow the filter and frame to lower toward the cab window.

12

Figure 3-78

Hold a light on one side of the new element and check for ruptures. A pinpoint of light indicates a rupture in the element paper. If this occurs, the element is defective and must be replaced.

Install the new element into the frame and check the seal, 1, around the perimeter of the element for nicks or cracks. Replace the element if any damage is found.

1

Figure 3-79

Reinstall the filter into its frame on the back of the cab roof. Lift the frame latch handle, 1, and hook the latch tab, 2, into the frame.

WARNING

The cab air filter is designed to remove dust from the air but will not exclude chemical vapor. Follow the chemical manufacturers directions regarding protection from dangerous chemicals.

12

Figure 3-80

3-53