SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 10 HOURS OR DAILY

OPERATION 1

Clean the Front Grille, Hydraulic Coolers,

Transmission Cooler, Air-Conditioning

Condenser, Radiator and Fuel Cooler.

Access to the components can be gained by unlatching the front grille screen at the front of the tractor. Swing the grille screen out.

Figure 3-8

2360 and 2425 Tractors

To swing the oil coolers, air-conditioning condenser, and fuel cooler out, pull the latch lever, 1, downward 90° and swing the cooler outward using the crossbar, 2.

1

2

The coolers, 1; condenser, 2; radiator, 3; grille screen, 4, and fuel cooler, 5, are now exposed and can be cleaned using compressed air. Thoroughly remove any chaff or debris that has accumulated in any of the fins of the components. Blowing compressed air in both directions through the fins will clean the components completely. Make sure that all perimeters of the components are cleaned out (not just the center area where the engine fan circulates).

NOTE: Never use a high-pressure washer to clean out radiator fins. The fins will be bent over and the radiator core rendered useless.

Figure 3-9

1

3

2

4

5

Figure 3-10

3-10

Page 235
Image 235
Buhler 2335, 2425, 2290, 2375, 2360 manual Every 10 Hours or Daily, Tractors