Section 12

Troubleshooting

 

Division

 

 

Symptom

 

 

Cause

 

Solution

 

 

 

 

 

 

 

The battery power is flat.

 

Recharge the battery pack, or replace

 

 

 

 

 

 

 

 

with a new battery pack.

 

 

 

 

No power.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The battery pack has not been

 

Reinsert the battery pack, making sure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

inserted correctly.

 

to orient it correctly.

 

Power

 

 

 

 

 

 

 

 

 

 

 

The camera

 

 

Turn off automatically if no

 

 

 

 

 

 

turns off by itself.

 

 

operation over 3 minutes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery pack is not properly

 

Reinsert the battery pack.

 

 

 

 

Not charging

 

 

inserted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery pack is out of order.

 

Replace with a new battery pack.

 

 

 

 

Beep sound

 

 

The battery power runs low.

 

Recharge the battery pack, or replace.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The maximum number of

 

Install a new card, or erase the images

 

Shooting

 

 

Camera does not

 

 

 

that are not necessary. Save the

 

 

 

 

operate.

 

 

images or video clip recording

 

images to separate media that you

 

 

 

 

 

 

memory has been consumed.

 

 

 

 

 

 

 

 

 

want.

 

 

 

 

 

 

 

 

 

 

 

 

 

No playback

 

 

The mode is not to set play

 

Set the main mode to play.

 

 

 

 

images appear.

 

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Can’t play

 

 

 

 

Please change the codec to Xvid

 

 

 

 

 

 

File format is not correct.

 

format for movie file and the file format

 

 

 

 

downloaded file.

 

 

 

 

Playback

 

 

 

 

 

 

to jpeg format.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The mode is not to set play

 

Set the main mode to play.

 

 

 

 

 

 

 

mode.

 

 

 

 

 

No TV out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The TV system setting is not

 

Set the TV system to your TV system,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

correct.

 

for example, PAL system in E.U.

 

 

 

 

Cannot focus

 

 

Zoom function is active.

 

Using Zoom In/ Out function.

 

 

 

 

 

 

 

 

Focus

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check the macro switch for proper

 

 

 

properly.

 

 

Macro switch is not correct.

 

 

 

 

 

 

 

 

situation.

 

 

 

 

 

 

 

 

 

 

 

 

 

No card

 

There is no SD card.

 

Turn off the power and insert a new

 

 

 

 

 

 

SD card.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MISC.

 

 

 

 

 

SD card is on the protected

 

Set a SD card to non-protected mode.

 

 

 

Cannot erase

 

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

images.

 

 

 

 

 

 

 

 

 

 

 

An image file is on the

 

Set an image file to non-protected

 

 

 

 

 

 

 

protected mode.

 

mode.

 

 

 

 

 

 

 

 

 

 

58

Page 59
Image 59
Creative 525D user manual Troubleshooting