Buhler 2335, 2425, 2290, 2375 Check the Radiator and Heating System Hoses, Check the Cab Mounts

SECTION 3 - LUBRICATION AND MAINTENANCE

EVERY 1500 HOURS OR YEARLY

On the Model 2360 and 2425 (N14), check the exhaust pipe to turbo outlet clamp, 1, and the compressor housing to turbo body clamp, 2. Torque the clamps to 8 N⋅m (72 in. lbs.). Torque the lower oil drain line cap screws, 3, to 27 N⋅m (20 ft. lbs.). Make sure the upper oil line fitting, 4, is tight.

Tighten the four nuts that mount the turbocharger to the exhaust manifold of the engine to 65 N⋅m (50 ft. lbs.).

If any oil leaks or broken connections are found, contact your Buhler Versatile dealer.

4

2

1

3

Figure 3-98

OPERATION 58

Check the Radiator and Heating System Hoses

Check the upper and lower radiator hoses, 1, for deterioration due to heat or contact with other engine components. Inspect the heater hoses, 2, for any wear or damage.

If any hoses in the engine cooling system or tractor heating system require replacement, contact your Buhler Versatile dealer.

2

1

Figure 3-99

OPERATION 59

Check the Cab Mounts

The cab is mounted on four rubber mounts in each corner of the cab.

Check the mounts, 1, for wear or deterioration and torque the mount bolt and nut to 217 N⋅m (160 ft. lbs.). Torque the bolts, 2, that hold the mounts to the frame to 97 N⋅m (72 ft. lbs.).

If the mounts require replacement, contact your Buhler Versatile dealer.

1

2

Figure 3-100

3-61